DVSA Statistics
1994 Rover 414
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1994 Rover 414 (only 17 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 17 DVSA anonymised MOT tests · About this data
Pass Rate
82.4%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 17 recorded tests.
Pre-MOT Checklist for 1994 Rover 414
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 4
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Rover 414.
Frequently Asked Questions
Is a 1994 Rover 414 likely to fail its MOT?
Based on DVSA statistics, the 1994 Rover 414 has a 82.4% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1994 Rover 414?
The most common MOT failure reasons for a 1994 Rover 414 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements, number plate inscription missing or illegible. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1994 Rover 414 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements, number plate inscription missing or illegible. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1994 Rover 414s fail their MOT?
Around 18% of 1994 Rover 414s fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and the aim of a headlamp is not within limits laid down in the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 1994 Rover 414 MOT?
Before your 1994 Rover 414 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements, number plate inscription missing or illegible. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1994 Rover 414 reliable for MOT?
With a 82.4% MOT pass rate, the 1994 Rover 414 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.