Skip to content
MOTCHECK
Beta

DVSA Statistics

1994 Rover 416
MOT Pass Rate & Pre-MOT Checklist

Used 1994 Rover 416s usually pass their MOT, but around 1 in 5 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn and fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Based on 52 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

78.8%

Pass Rate

Based on 52 DVSA anonymised MOT tests · About this data

Pass Rate

78.8%

About average

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Worn tyres are a safety issue and common MOT fail.

Fixes:Tyre tread depth not in accordance with the requirements
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    8.7%
  2. 2

    A suspension pin, bush or joint excessively worn

    8.7%
  3. 3

    Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users

    5.8%
  4. 4

    Tyre tread depth not in accordance with the requirements

    5.8%
  5. 5

    Exhaust system leaking or insecure

    5.8%

Based on DVSA statistics from 52 recorded tests.

Pre-MOT Checklist for 1994 Rover 416

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre

    Tyres – Common fail on this model

  • 3

    Check exhaust for leaks, holes, or excessive corrosion - listen for blowing

    Exhaust – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Rover 416.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1994 Rover 416 likely to fail its MOT?

Based on DVSA statistics, the 1994 Rover 416 has a 78.8% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1994 Rover 416?

The most common MOT failure reasons for a 1994 Rover 416 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1994 Rover 416 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1994 Rover 416s fail their MOT?

Around 21% of 1994 Rover 416s fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.

What should I check before my 1994 Rover 416 MOT?

Before your 1994 Rover 416 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1994 Rover 416 reliable for MOT?

With a 78.8% MOT pass rate, the 1994 Rover 416 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.