DVSA Statistics
1996 Rover 420
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1996 Rover 420 (only 29 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 29 DVSA anonymised MOT tests · About this data
Pass Rate
75.9%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 29 recorded tests.
Pre-MOT Checklist for 1996 Rover 420
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 4
Ensure number plate lights work and plates are clean and legible
Lighting – Common fail on this model
How Does This Compare to Other Years?
Previous Year
1995 Rover 420
Based on 9 UK MOT tests
Next Year
1997 Rover 420
Based on 34 UK MOT tests
The 1996 model has a lower pass rate than 1995, but performs better than 1997.
Why Trust This Data?
Official UK Government Source
This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.
Understanding the Statistics
This page is based on 29 MOT tests from the 2023 DVSA dataset. Your 1996 Rover 420 was 27 years old when this data was collected and is now 30 years old.
Sample Size
Limited data - 29 tests (use as rough guide only)
Limitations
Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Rover 420.
Frequently Asked Questions
Is a 1996 Rover 420 likely to fail its MOT?
Based on DVSA statistics, the 1996 Rover 420 has a 75.9% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1996 Rover 420?
The most common MOT failure reasons for a 1996 Rover 420 are: a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1996 Rover 420 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1996 Rover 420s fail their MOT?
Around 24% of 1996 Rover 420s fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are a tyre seriously damaged and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 1996 Rover 420 MOT?
Before your 1996 Rover 420 MOT, check these commonly-failed items: a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1996 Rover 420 reliable for MOT?
With a 75.9% MOT pass rate, the 1996 Rover 420 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.