DVSA Statistics
2000 Rover 420
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2000 Rover 420 (only 7 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 7 DVSA anonymised MOT tests · About this data
Pass Rate
71.4%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 7 recorded tests.
Pre-MOT Checklist for 2000 Rover 420
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Rover 420.
Frequently Asked Questions
Is a 2000 Rover 420 likely to fail its MOT?
Based on DVSA statistics, the 2000 Rover 420 has a 71.4% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2000 Rover 420?
The most common MOT failure reasons for a 2000 Rover 420 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, headlamp emitted colour, position or intensity not in accordance with the requirements, number plate inscription missing or illegible. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2000 Rover 420 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, headlamp emitted colour, position or intensity not in accordance with the requirements, number plate inscription missing or illegible. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2000 Rover 420s fail their MOT?
Around 29% of 2000 Rover 420s fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and headlamp emitted colour, position or intensity not in accordance with the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2000 Rover 420 MOT?
Before your 2000 Rover 420 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, headlamp emitted colour, position or intensity not in accordance with the requirements, number plate inscription missing or illegible. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2000 Rover 420 reliable for MOT?
With a 71.4% MOT pass rate, the 2000 Rover 420 performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.