DVSA Statistics
1995 Rover 820
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1995 Rover 820 (only 15 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 15 DVSA anonymised MOT tests · About this data
Pass Rate
60%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 15 recorded tests.
Pre-MOT Checklist for 1995 Rover 820
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Rover 820.
Frequently Asked Questions
Is a 1995 Rover 820 likely to fail its MOT?
Based on DVSA statistics, the 1995 Rover 820 has a 60% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 1995 Rover 820?
The most common MOT failure reasons for a 1995 Rover 820 are: a suspension component excessively damaged or corroded, a suspension pin, bush or joint excessively worn, emissions levels exceed default limits. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1995 Rover 820 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension component excessively damaged or corroded, a suspension pin, bush or joint excessively worn, emissions levels exceed default limits. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1995 Rover 820s fail their MOT?
Around 40% of 1995 Rover 820s fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are a suspension component excessively damaged or corroded and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1995 Rover 820 MOT?
Before your 1995 Rover 820 MOT, check these commonly-failed items: a suspension component excessively damaged or corroded, a suspension pin, bush or joint excessively worn, emissions levels exceed default limits. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1995 Rover 820 reliable for MOT?
With a 60% MOT pass rate, the 1995 Rover 820 performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.