Skip to content
MOTCHECK
Beta

DVSA Statistics

1983 Rover Mini
MOT Pass Rate & Pre-MOT Checklist

Used 1983 Rover Minis usually pass their MOT, but around 1 in 5 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements and steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc. Based on 90 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

81.1%

Pass Rate

Based on 90 DVSA anonymised MOT tests · About this data

Pass Rate

81.1%

Higher than average

Top Failure Reasons

Common MOT failures for this model

Quick DIY Fix

10 minutes fix
Save Money

Headlight bulbs are a common MOT fail. Easy DIY replacement.

Fixes:The aim of a headlamp is not within limits laid down in the requirements
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    13.2%
  2. 2

    The aim of a headlamp is not within limits laid down in the requirements

    8.5%
  3. 3

    Steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc

    3.8%
  4. 4

    A transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc

    3.8%
  5. 5

    A suspension pin, bush or joint excessively worn

    3.8%

Based on DVSA statistics from 90 recorded tests.

Pre-MOT Checklist for 1983 Rover Mini

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Test all headlights work and aim is correct - check for condensation inside

    Lighting – Common fail on this model

  • 3

    Check for excessive play in steering wheel - should be minimal free movement

    Steering – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Rover Mini.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1983 Rover Mini likely to fail its MOT?

Based on DVSA statistics, the 1983 Rover Mini has a 81.1% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1983 Rover Mini?

The most common MOT failure reasons for a 1983 Rover Mini are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements, steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1983 Rover Mini fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements, steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1983 Rover Minis fail their MOT?

Around 19% of 1983 Rover Minis fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and the aim of a headlamp is not within limits laid down in the requirements. Pre-checking these items can significantly improve your chances.

What should I check before my 1983 Rover Mini MOT?

Before your 1983 Rover Mini MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements, steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1983 Rover Mini reliable for MOT?

With a 81.1% MOT pass rate, the 1983 Rover Mini performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.