Skip to content
MOTCHECK
Beta

DVSA Statistics

1997 Rover Mini
MOT Pass Rate & Pre-MOT Checklist

Used 1997 Rover Minis usually pass their MOT, but around 1 in 4 still fail, most often for a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and the aim of a headlamp is not within limits laid down in the requirements. Based on 852 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

77.5%

Pass Rate

Based on 852 DVSA anonymised MOT tests · About this data

Pass Rate

77.5%

About average

Top Failure Reasons

Common MOT failures for this model

Quick DIY Fix

10 minutes fix
Save Money

Headlight bulbs are a common MOT fail. Easy DIY replacement.

Fixes:The aim of a headlamp is not within limits laid down in the requirements
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    A suspension pin, bush or joint excessively worn

    7.1%
  2. 2

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    6.2%
  3. 3

    The aim of a headlamp is not within limits laid down in the requirements

    4.9%
  4. 4

    Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users

    4.5%
  5. 5

    Tyre tread depth not in accordance with the requirements

    3.5%

Based on DVSA statistics from 852 recorded tests.

Pre-MOT Checklist for 1997 Rover Mini

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Test all headlights work and aim is correct - check for condensation inside

    Lighting – Common fail on this model

  • 3

    Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre

    Tyres – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Rover Mini.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1997 Rover Mini likely to fail its MOT?

Based on DVSA statistics, the 1997 Rover Mini has a 77.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1997 Rover Mini?

The most common MOT failure reasons for a 1997 Rover Mini are: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1997 Rover Mini fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1997 Rover Minis fail their MOT?

Around 23% of 1997 Rover Minis fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.

What should I check before my 1997 Rover Mini MOT?

Before your 1997 Rover Mini MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1997 Rover Mini reliable for MOT?

With a 77.5% MOT pass rate, the 1997 Rover Mini performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.