Skip to content
MOTCHECK
Beta

DVSA Statistics

2010 Saab 9-3 Turbo Edition Ttid 160 A
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2010 Saab 9-3 Turbo Edition Ttid 160 A (only 22 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

81.8%

Pass Rate

Based on 22 DVSA anonymised MOT tests · About this data

Pass Rate

81.8%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:A brake hose ferrule excessively corroded
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    A spring or spring component fractured or seriously weakened

    20%
  2. 2

    A brake hose ferrule excessively corroded

    20%
  3. 3

    A door will not open using the relevant control or close properly

    10%
  4. 4

    Tyre tread depth not in accordance with the requirements

    10%
  5. 5

    Any part of the noise suppression system likely to become detached

    10%

Based on DVSA statistics from 22 recorded tests.

Pre-MOT Checklist for 2010 Saab 9-3 Turbo Edition Ttid 160 A

Based on common failure points for this model, check these items before your MOT:

  • 1

    Visually inspect coil springs for cracks or broken coils

    Suspension – Common fail on this model

  • 2

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

  • 3

    Ensure all doors open and close properly and latches engage

    Bodywork – Common fail on this model

  • 4

    Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre

    Tyres – Common fail on this model

How Does This Compare to Other Years?

See how this 2010 model compares to the next model year.

Why Trust This Data?

Official UK Government Source

This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.

Understanding the Statistics

This page is based on 22 MOT tests from the 2023 DVSA dataset. Your 2010 Saab 9-3 Turbo Edition Ttid 160 A was 13 years old when this data was collected and is now 16 years old.

Sample Size

Limited data - 22 tests (use as rough guide only)

Limitations

Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Saab 9-3 Turbo Edition Ttid 160 A.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2010 Saab 9-3 Turbo Edition Ttid 160 A likely to fail its MOT?

Based on DVSA statistics, the 2010 Saab 9-3 Turbo Edition Ttid 160 A has a 81.8% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2010 Saab 9-3 Turbo Edition Ttid 160 A?

The most common MOT failure reasons for a 2010 Saab 9-3 Turbo Edition Ttid 160 A are: a spring or spring component fractured or seriously weakened, a brake hose ferrule excessively corroded, a door will not open using the relevant control or close properly. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2010 Saab 9-3 Turbo Edition Ttid 160 A fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a spring or spring component fractured or seriously weakened, a brake hose ferrule excessively corroded, a door will not open using the relevant control or close properly. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2010 Saab 9-3 Turbo Edition Ttid 160 As fail their MOT?

Around 18% of 2010 Saab 9-3 Turbo Edition Ttid 160 As fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are a spring or spring component fractured or seriously weakened and a brake hose ferrule excessively corroded. Pre-checking these items can significantly improve your chances.

What should I check before my 2010 Saab 9-3 Turbo Edition Ttid 160 A MOT?

Before your 2010 Saab 9-3 Turbo Edition Ttid 160 A MOT, check these commonly-failed items: a spring or spring component fractured or seriously weakened, a brake hose ferrule excessively corroded, a door will not open using the relevant control or close properly. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2010 Saab 9-3 Turbo Edition Ttid 160 A reliable for MOT?

With a 81.8% MOT pass rate, the 2010 Saab 9-3 Turbo Edition Ttid 160 A performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.