Skip to content
MOTCHECK
Beta

DVSA Statistics

1990 Saab 900
MOT Pass Rate & Pre-MOT Checklist

Used 1990 Saab 900s usually pass their MOT, but around 1 in 4 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users and a tyre seriously damaged. Based on 354 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

75.4%

Pass Rate

Based on 354 DVSA anonymised MOT tests · About this data

Pass Rate

75.4%

About average

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Worn tyres are a safety issue and common MOT fail.

Fixes:A tyre seriously damaged
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    7.9%
  2. 2

    Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users

    5%
  3. 3

    A tyre seriously damaged

    4.8%
  4. 4

    Exhaust system leaking or insecure

    4.4%
  5. 5

    Parking brake efficiency below minimum requirement

    3.6%

Based on DVSA statistics from 354 recorded tests.

Pre-MOT Checklist for 1990 Saab 900

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre

    Tyres – Common fail on this model

  • 3

    Check exhaust for leaks, holes, or excessive corrosion - listen for blowing

    Exhaust – Common fail on this model

  • 4

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Saab 900.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1990 Saab 900 likely to fail its MOT?

Based on DVSA statistics, the 1990 Saab 900 has a 75.4% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1990 Saab 900?

The most common MOT failure reasons for a 1990 Saab 900 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a tyre seriously damaged. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1990 Saab 900 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a tyre seriously damaged. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1990 Saab 900s fail their MOT?

Around 25% of 1990 Saab 900s fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Pre-checking these items can significantly improve your chances.

What should I check before my 1990 Saab 900 MOT?

Before your 1990 Saab 900 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a tyre seriously damaged. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1990 Saab 900 reliable for MOT?

With a 75.4% MOT pass rate, the 1990 Saab 900 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.