DVSA Statistics
2005 Scania Unclassified
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2005 Scania Unclassified (only 15 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 15 DVSA anonymised MOT tests · About this data
Pass Rate
86.7%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 15 recorded tests.
Pre-MOT Checklist for 2005 Scania Unclassified
Based on common failure points for this model, check these items before your MOT:
- 1
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 2
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 3
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Scania Unclassified.
Frequently Asked Questions
Is a 2005 Scania Unclassified likely to fail its MOT?
Based on DVSA statistics, the 2005 Scania Unclassified has a 86.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2005 Scania Unclassified?
The most common MOT failure reasons for a 2005 Scania Unclassified are: a mandatory tell-tale for main beam headlamp or rear fog lamp missing or inoperative, a mandatory tell-tale for direction indicators missing or inoperative, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2005 Scania Unclassified fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a mandatory tell-tale for main beam headlamp or rear fog lamp missing or inoperative, a mandatory tell-tale for direction indicators missing or inoperative, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2005 Scania Unclassifieds fail their MOT?
Around 13% of 2005 Scania Unclassifieds fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are a mandatory tell-tale for main beam headlamp or rear fog lamp missing or inoperative and a mandatory tell-tale for direction indicators missing or inoperative. Pre-checking these items can significantly improve your chances.
What should I check before my 2005 Scania Unclassified MOT?
Before your 2005 Scania Unclassified MOT, check these commonly-failed items: a mandatory tell-tale for main beam headlamp or rear fog lamp missing or inoperative, a mandatory tell-tale for direction indicators missing or inoperative, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2005 Scania Unclassified reliable for MOT?
With a 86.7% MOT pass rate, the 2005 Scania Unclassified performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.