DVSA Statistics
1997 Seat Cordoba
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1997 Seat Cordoba (only 7 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 7 DVSA anonymised MOT tests · About this data
Pass Rate
85.7%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 7 recorded tests.
Pre-MOT Checklist for 1997 Seat Cordoba
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Seat Cordoba.
Frequently Asked Questions
Is a 1997 Seat Cordoba likely to fail its MOT?
Based on DVSA statistics, the 1997 Seat Cordoba has a 85.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1997 Seat Cordoba?
The most common MOT failure reasons for a 1997 Seat Cordoba are: a suspension component excessively damaged or corroded, a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1997 Seat Cordoba fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension component excessively damaged or corroded, a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1997 Seat Cordobas fail their MOT?
Around 14% of 1997 Seat Cordobas fail their MOT test, meaning roughly 1 in 7 don't pass first time. The most common reasons are a suspension component excessively damaged or corroded and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1997 Seat Cordoba MOT?
Before your 1997 Seat Cordoba MOT, check these commonly-failed items: a suspension component excessively damaged or corroded, a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1997 Seat Cordoba reliable for MOT?
With a 85.7% MOT pass rate, the 1997 Seat Cordoba performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.