DVSA Statistics
2020 Sinnis Matrix 3i
MOT Pass Rate & Pre-MOT Checklist
Used 2020 Sinnis Matrix 3is usually pass their MOT, but around 1 in 6 still fail, most often for steering head bearings have excessive wear or play, significant brake effort recorded with no brake applied indicating a binding brake and reflector missing or reflecting white to the rear. Based on 51 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 51 DVSA anonymised MOT tests · About this data
Pass Rate
84.3%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 51 recorded tests.
Pre-MOT Checklist for 2020 Sinnis Matrix 3i
Based on common failure points for this model, check these items before your MOT:
- 1
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check rear reflectors are present, clean, and not cracked
Lighting – Common fail on this model
- 4
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Sinnis Matrix 3i.
Frequently Asked Questions
Is a 2020 Sinnis Matrix 3i likely to fail its MOT?
Based on DVSA statistics, the 2020 Sinnis Matrix 3i has a 84.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2020 Sinnis Matrix 3i?
The most common MOT failure reasons for a 2020 Sinnis Matrix 3i are: steering head bearings have excessive wear or play, significant brake effort recorded with no brake applied indicating a binding brake, reflector missing or reflecting white to the rear. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2020 Sinnis Matrix 3i fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: steering head bearings have excessive wear or play, significant brake effort recorded with no brake applied indicating a binding brake, reflector missing or reflecting white to the rear. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2020 Sinnis Matrix 3is fail their MOT?
Around 16% of 2020 Sinnis Matrix 3is fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are steering head bearings have excessive wear or play and significant brake effort recorded with no brake applied indicating a binding brake. Pre-checking these items can significantly improve your chances.
What should I check before my 2020 Sinnis Matrix 3i MOT?
Before your 2020 Sinnis Matrix 3i MOT, check these commonly-failed items: steering head bearings have excessive wear or play, significant brake effort recorded with no brake applied indicating a binding brake, reflector missing or reflecting white to the rear. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2020 Sinnis Matrix 3i reliable for MOT?
With a 84.3% MOT pass rate, the 2020 Sinnis Matrix 3i performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.