DVSA Statistics
2010 Smart Fortwo Brabus Xclusive A
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Smart Fortwo Brabus Xclusive A (only 10 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 10 DVSA anonymised MOT tests · About this data
Pass Rate
80%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 10 recorded tests.
Pre-MOT Checklist for 2010 Smart Fortwo Brabus Xclusive A
Based on common failure points for this model, check these items before your MOT:
- 1
Visually inspect coil springs for cracks or broken coils
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 4
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Smart Fortwo Brabus Xclusive A.
Frequently Asked Questions
Is a 2010 Smart Fortwo Brabus Xclusive A likely to fail its MOT?
Based on DVSA statistics, the 2010 Smart Fortwo Brabus Xclusive A has a 80% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Smart Fortwo Brabus Xclusive A?
The most common MOT failure reasons for a 2010 Smart Fortwo Brabus Xclusive A are: a spring or spring component fractured or seriously weakened, brake disc or drum excessively weakened, insecure or fractured, tyre tread depth not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Smart Fortwo Brabus Xclusive A fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a spring or spring component fractured or seriously weakened, brake disc or drum excessively weakened, insecure or fractured, tyre tread depth not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Smart Fortwo Brabus Xclusive As fail their MOT?
Around 20% of 2010 Smart Fortwo Brabus Xclusive As fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are a spring or spring component fractured or seriously weakened and brake disc or drum excessively weakened, insecure or fractured. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Smart Fortwo Brabus Xclusive A MOT?
Before your 2010 Smart Fortwo Brabus Xclusive A MOT, check these commonly-failed items: a spring or spring component fractured or seriously weakened, brake disc or drum excessively weakened, insecure or fractured, tyre tread depth not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Smart Fortwo Brabus Xclusive A reliable for MOT?
With a 80% MOT pass rate, the 2010 Smart Fortwo Brabus Xclusive A performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.