DVSA Statistics
1992 Subaru 284 4wd Pick Up
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1992 Subaru 284 4wd Pick Up (only 14 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 14 DVSA anonymised MOT tests · About this data
Pass Rate
78.6%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 14 recorded tests.
Pre-MOT Checklist for 1992 Subaru 284 4wd Pick Up
Based on common failure points for this model, check these items before your MOT:
- 1
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 4
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Subaru 284 4wd Pick Up.
Frequently Asked Questions
Is a 1992 Subaru 284 4wd Pick Up likely to fail its MOT?
Based on DVSA statistics, the 1992 Subaru 284 4wd Pick Up has a 78.6% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1992 Subaru 284 4wd Pick Up?
The most common MOT failure reasons for a 1992 Subaru 284 4wd Pick Up are: exhaust system leaking or insecure, a suspension pin, bush or joint excessively worn, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1992 Subaru 284 4wd Pick Up fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: exhaust system leaking or insecure, a suspension pin, bush or joint excessively worn, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1992 Subaru 284 4wd Pick Ups fail their MOT?
Around 21% of 1992 Subaru 284 4wd Pick Ups fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are exhaust system leaking or insecure and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1992 Subaru 284 4wd Pick Up MOT?
Before your 1992 Subaru 284 4wd Pick Up MOT, check these commonly-failed items: exhaust system leaking or insecure, a suspension pin, bush or joint excessively worn, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1992 Subaru 284 4wd Pick Up reliable for MOT?
With a 78.6% MOT pass rate, the 1992 Subaru 284 4wd Pick Up performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.