DVSA Statistics
1998 Subaru Legacy
MOT Pass Rate & Pre-MOT Checklist
Used 1998 Subaru Legacys usually pass their MOT, but around 1 in 4 still fail, most often for a tyre seriously damaged, a suspension pin, bush or joint excessively worn and brake pipe damaged or excessively corroded. Based on 67 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 67 DVSA anonymised MOT tests · About this data
Pass Rate
71.6%
About average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 67 recorded tests.
Pre-MOT Checklist for 1998 Subaru Legacy
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 4
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Subaru Legacy.
Frequently Asked Questions
Is a 1998 Subaru Legacy likely to fail its MOT?
Based on DVSA statistics, the 1998 Subaru Legacy has a 71.6% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 1998 Subaru Legacy?
The most common MOT failure reasons for a 1998 Subaru Legacy are: a tyre seriously damaged, a suspension pin, bush or joint excessively worn, brake pipe damaged or excessively corroded. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1998 Subaru Legacy fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a tyre seriously damaged, a suspension pin, bush or joint excessively worn, brake pipe damaged or excessively corroded. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1998 Subaru Legacys fail their MOT?
Around 28% of 1998 Subaru Legacys fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are a tyre seriously damaged and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1998 Subaru Legacy MOT?
Before your 1998 Subaru Legacy MOT, check these commonly-failed items: a tyre seriously damaged, a suspension pin, bush or joint excessively worn, brake pipe damaged or excessively corroded. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1998 Subaru Legacy reliable for MOT?
With a 71.6% MOT pass rate, the 1998 Subaru Legacy performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.