Skip to content
MOTCHECK
Beta

DVSA Statistics

1988 Subaru Mv Pickup
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 1988 Subaru Mv Pickup (only 11 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

81.8%

Pass Rate

Based on 11 DVSA anonymised MOT tests · About this data

Pass Rate

81.8%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Brake disc or drum excessively weakened, insecure or fractured
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    41.7%
  2. 2

    The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired

    16.7%
  3. 3

    Brake disc or drum excessively weakened, insecure or fractured

    16.7%
  4. 4

    The strength or continuity of the load bearing structure within 30cm of any towbar mounting bracket is so weakened that the towbar is likely to become detached

    16.7%
  5. 5

    A suspension component excessively damaged or corroded

    8.3%

Based on DVSA statistics from 11 recorded tests.

Pre-MOT Checklist for 1988 Subaru Mv Pickup

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Subaru Mv Pickup.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1988 Subaru Mv Pickup likely to fail its MOT?

Based on DVSA statistics, the 1988 Subaru Mv Pickup has a 81.8% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1988 Subaru Mv Pickup?

The most common MOT failure reasons for a 1988 Subaru Mv Pickup are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, brake disc or drum excessively weakened, insecure or fractured. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1988 Subaru Mv Pickup fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, brake disc or drum excessively weakened, insecure or fractured. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1988 Subaru Mv Pickups fail their MOT?

Around 18% of 1988 Subaru Mv Pickups fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.

What should I check before my 1988 Subaru Mv Pickup MOT?

Before your 1988 Subaru Mv Pickup MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, brake disc or drum excessively weakened, insecure or fractured. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1988 Subaru Mv Pickup reliable for MOT?

With a 81.8% MOT pass rate, the 1988 Subaru Mv Pickup performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.