DVSA Statistics
2008 Sukida Sk 125-4 Inspector
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2008 Sukida Sk 125-4 Inspector (only 7 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 7 DVSA anonymised MOT tests · About this data
Pass Rate
85.7%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 7 recorded tests.
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Sukida Sk 125-4 Inspector.
Frequently Asked Questions
Is a 2008 Sukida Sk 125-4 Inspector likely to fail its MOT?
Based on DVSA statistics, the 2008 Sukida Sk 125-4 Inspector has a 85.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2008 Sukida Sk 125-4 Inspector?
The most common MOT failure reasons for a 2008 Sukida Sk 125-4 Inspector are: a transmission belt, chain, sprocket or pulley excessively loose or worn, a footrest missing or insecure. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2008 Sukida Sk 125-4 Inspector fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a transmission belt, chain, sprocket or pulley excessively loose or worn, a footrest missing or insecure. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2008 Sukida Sk 125-4 Inspectors fail their MOT?
Around 14% of 2008 Sukida Sk 125-4 Inspectors fail their MOT test, meaning roughly 1 in 7 don't pass first time. The most common reasons are a transmission belt, chain, sprocket or pulley excessively loose or worn and a footrest missing or insecure. Pre-checking these items can significantly improve your chances.
What should I check before my 2008 Sukida Sk 125-4 Inspector MOT?
Before your 2008 Sukida Sk 125-4 Inspector MOT, check these commonly-failed items: a transmission belt, chain, sprocket or pulley excessively loose or worn, a footrest missing or insecure. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2008 Sukida Sk 125-4 Inspector reliable for MOT?
With a 85.7% MOT pass rate, the 2008 Sukida Sk 125-4 Inspector performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.