DVSA Statistics
1966 Sunbeam Alpine
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1966 Sunbeam Alpine (only 17 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 17 DVSA anonymised MOT tests · About this data
Pass Rate
94.1%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 17 recorded tests.
Pre-MOT Checklist for 1966 Sunbeam Alpine
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
How Does This Compare to Other Years?
Previous Year
1965 Sunbeam Alpine
Based on 10 UK MOT tests
Next Year
1967 Sunbeam Alpine
Based on 21 UK MOT tests
Compare how MOT performance varies across Sunbeam Alpine model years.
Why Trust This Data?
Official UK Government Source
This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.
Understanding the Statistics
This page is based on 17 MOT tests from the 2023 DVSA dataset. Your 1966 Sunbeam Alpine was 57 years old when this data was collected and is now 60 years old.
Sample Size
Limited data - 17 tests (use as rough guide only)
Limitations
Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Sunbeam Alpine.
Frequently Asked Questions
Is a 1966 Sunbeam Alpine likely to fail its MOT?
Based on DVSA statistics, the 1966 Sunbeam Alpine has a 94.1% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1966 Sunbeam Alpine?
The most common MOT failure reasons for a 1966 Sunbeam Alpine are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a wheel bearing with excessive play. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1966 Sunbeam Alpine fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a wheel bearing with excessive play. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1966 Sunbeam Alpines fail their MOT?
Around 6% of 1966 Sunbeam Alpines fail their MOT test, meaning roughly 1 in 17 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 1966 Sunbeam Alpine MOT?
Before your 1966 Sunbeam Alpine MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a wheel bearing with excessive play. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1966 Sunbeam Alpine reliable for MOT?
With a 94.1% MOT pass rate, the 1966 Sunbeam Alpine performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.