DVSA Statistics
1990 Sunbeam Alpine
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1990 Sunbeam Alpine (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1990 Sunbeam Alpine
Based on common failure points for this model, check these items before your MOT:
- 1
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 2
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 4
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Sunbeam Alpine.
Frequently Asked Questions
Is a 1990 Sunbeam Alpine likely to fail its MOT?
Based on DVSA statistics, the 1990 Sunbeam Alpine has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1990 Sunbeam Alpine?
The most common MOT failure reasons for a 1990 Sunbeam Alpine are: windscreen washers not working or not providing sufficient fluid to clear the windscreen, indicator or hazard warning switch does not operate in accordance with the requirements, exhaust system leaking or insecure. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1990 Sunbeam Alpine fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: windscreen washers not working or not providing sufficient fluid to clear the windscreen, indicator or hazard warning switch does not operate in accordance with the requirements, exhaust system leaking or insecure. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1990 Sunbeam Alpines fail their MOT?
Around 50% of 1990 Sunbeam Alpines fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are windscreen washers not working or not providing sufficient fluid to clear the windscreen and indicator or hazard warning switch does not operate in accordance with the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 1990 Sunbeam Alpine MOT?
Before your 1990 Sunbeam Alpine MOT, check these commonly-failed items: windscreen washers not working or not providing sufficient fluid to clear the windscreen, indicator or hazard warning switch does not operate in accordance with the requirements, exhaust system leaking or insecure. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1990 Sunbeam Alpine reliable for MOT?
With a 50% MOT pass rate, the 1990 Sunbeam Alpine performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.