DVSA Statistics
1975 Sunbeam Rapier
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1975 Sunbeam Rapier (only 3 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 3 DVSA anonymised MOT tests · About this data
Pass Rate
66.7%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 3 recorded tests.
Pre-MOT Checklist for 1975 Sunbeam Rapier
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
- 3
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Sunbeam Rapier.
Frequently Asked Questions
Is a 1975 Sunbeam Rapier likely to fail its MOT?
Based on DVSA statistics, the 1975 Sunbeam Rapier has a 66.7% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 1975 Sunbeam Rapier?
The most common MOT failure reasons for a 1975 Sunbeam Rapier are: fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched, significant brake effort recorded with no brake applied indicating a binding brake. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1975 Sunbeam Rapier fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched, significant brake effort recorded with no brake applied indicating a binding brake. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1975 Sunbeam Rapiers fail their MOT?
Around 33% of 1975 Sunbeam Rapiers fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users and a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched. Pre-checking these items can significantly improve your chances.
What should I check before my 1975 Sunbeam Rapier MOT?
Before your 1975 Sunbeam Rapier MOT, check these commonly-failed items: fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched, significant brake effort recorded with no brake applied indicating a binding brake. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1975 Sunbeam Rapier reliable for MOT?
With a 66.7% MOT pass rate, the 1975 Sunbeam Rapier performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.