Skip to content
MOTCHECK
Beta

DVSA Statistics

2013 Superbyke Rmr
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2013 Superbyke Rmr (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    Reflector missing or reflecting white to the rear

    25%
  2. 2

    Lamp emitted colour, position or intensity not in accordance with the requirements

    25%
  3. 3

    Lamp showing red light to the front, white light to the rear or has heavily reduced light intensity

    25%
  4. 4

    A transmission belt, chain, sprocket or pulley excessively loose or worn

    25%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 2013 Superbyke Rmr

Based on common failure points for this model, check these items before your MOT:

  • 1

    Check rear reflectors are present, clean, and not cracked

    Lighting – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Superbyke Rmr.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2013 Superbyke Rmr likely to fail its MOT?

Based on DVSA statistics, the 2013 Superbyke Rmr has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2013 Superbyke Rmr?

The most common MOT failure reasons for a 2013 Superbyke Rmr are: reflector missing or reflecting white to the rear, lamp emitted colour, position or intensity not in accordance with the requirements, lamp showing red light to the front, white light to the rear or has heavily reduced light intensity. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2013 Superbyke Rmr fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: reflector missing or reflecting white to the rear, lamp emitted colour, position or intensity not in accordance with the requirements, lamp showing red light to the front, white light to the rear or has heavily reduced light intensity. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2013 Superbyke Rmrs fail their MOT?

Around 50% of 2013 Superbyke Rmrs fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are reflector missing or reflecting white to the rear and lamp emitted colour, position or intensity not in accordance with the requirements. Pre-checking these items can significantly improve your chances.

What should I check before my 2013 Superbyke Rmr MOT?

Before your 2013 Superbyke Rmr MOT, check these commonly-failed items: reflector missing or reflecting white to the rear, lamp emitted colour, position or intensity not in accordance with the requirements, lamp showing red light to the front, white light to the rear or has heavily reduced light intensity. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2013 Superbyke Rmr reliable for MOT?

With a 50% MOT pass rate, the 2013 Superbyke Rmr performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.