DVSA Statistics
2011 Suzuki An 400 L0
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2011 Suzuki An 400 L0 (only 39 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 39 DVSA anonymised MOT tests · About this data
Pass Rate
89.7%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 39 recorded tests.
Pre-MOT Checklist for 2011 Suzuki An 400 L0
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Check headlight beam pattern and alignment against a wall
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Suzuki An 400 L0.
Frequently Asked Questions
Is a 2011 Suzuki An 400 L0 likely to fail its MOT?
Based on DVSA statistics, the 2011 Suzuki An 400 L0 has a 89.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2011 Suzuki An 400 L0?
The most common MOT failure reasons for a 2011 Suzuki An 400 L0 are: brake lining or pad worn below 1.0mm, tyre tread depth not in accordance with the requirements, brake calliper or cylinder has no reserve travel and braking performance affected. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2011 Suzuki An 400 L0 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake lining or pad worn below 1.0mm, tyre tread depth not in accordance with the requirements, brake calliper or cylinder has no reserve travel and braking performance affected. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2011 Suzuki An 400 L0s fail their MOT?
Around 10% of 2011 Suzuki An 400 L0s fail their MOT test, meaning roughly 1 in 10 don't pass first time. The most common reasons are brake lining or pad worn below 1.0mm and tyre tread depth not in accordance with the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2011 Suzuki An 400 L0 MOT?
Before your 2011 Suzuki An 400 L0 MOT, check these commonly-failed items: brake lining or pad worn below 1.0mm, tyre tread depth not in accordance with the requirements, brake calliper or cylinder has no reserve travel and braking performance affected. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2011 Suzuki An 400 L0 reliable for MOT?
With a 89.7% MOT pass rate, the 2011 Suzuki An 400 L0 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.