Skip to content
MOTCHECK
Beta

DVSA Statistics

1990 Suzuki Fz50
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 1990 Suzuki Fz50 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    A shock absorber not functioning or leaking severely

    40%
  2. 2

    Handlebar so insecure it is likely to become detached

    20%
  3. 3

    A main load-bearing structural member corroded to the extent that the rigidity of the assembly is seriously reduced

    20%
  4. 4

    Mudguard insecure

    20%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 1990 Suzuki Fz50

Based on common failure points for this model, check these items before your MOT:

  • 1

    Push down on each corner and release - car should bounce once only

    Suspension – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Suzuki Fz50.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1990 Suzuki Fz50 likely to fail its MOT?

Based on DVSA statistics, the 1990 Suzuki Fz50 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 1990 Suzuki Fz50?

The most common MOT failure reasons for a 1990 Suzuki Fz50 are: a shock absorber not functioning or leaking severely, handlebar so insecure it is likely to become detached, a main load-bearing structural member corroded to the extent that the rigidity of the assembly is seriously reduced. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1990 Suzuki Fz50 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a shock absorber not functioning or leaking severely, handlebar so insecure it is likely to become detached, a main load-bearing structural member corroded to the extent that the rigidity of the assembly is seriously reduced. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1990 Suzuki Fz50s fail their MOT?

Around 50% of 1990 Suzuki Fz50s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a shock absorber not functioning or leaking severely and handlebar so insecure it is likely to become detached. Pre-checking these items can significantly improve your chances.

What should I check before my 1990 Suzuki Fz50 MOT?

Before your 1990 Suzuki Fz50 MOT, check these commonly-failed items: a shock absorber not functioning or leaking severely, handlebar so insecure it is likely to become detached, a main load-bearing structural member corroded to the extent that the rigidity of the assembly is seriously reduced. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1990 Suzuki Fz50 reliable for MOT?

With a 50% MOT pass rate, the 1990 Suzuki Fz50 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.