DVSA Statistics
2010 Suzuki Gsf 1250 Sa K9
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Suzuki Gsf 1250 Sa K9 (only 11 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 11 DVSA anonymised MOT tests · About this data
Pass Rate
90.9%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 11 recorded tests.
Pre-MOT Checklist for 2010 Suzuki Gsf 1250 Sa K9
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Suzuki Gsf 1250 Sa K9.
Frequently Asked Questions
Is a 2010 Suzuki Gsf 1250 Sa K9 likely to fail its MOT?
Based on DVSA statistics, the 2010 Suzuki Gsf 1250 Sa K9 has a 90.9% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Suzuki Gsf 1250 Sa K9?
The most common MOT failure reasons for a 2010 Suzuki Gsf 1250 Sa K9 are: brake control has insufficient reserve travel, the aim of a headlamp is not within limits laid down in the requirements, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Suzuki Gsf 1250 Sa K9 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake control has insufficient reserve travel, the aim of a headlamp is not within limits laid down in the requirements, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Suzuki Gsf 1250 Sa K9s fail their MOT?
Around 9% of 2010 Suzuki Gsf 1250 Sa K9s fail their MOT test, meaning roughly 1 in 11 don't pass first time. The most common reasons are brake control has insufficient reserve travel and the aim of a headlamp is not within limits laid down in the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Suzuki Gsf 1250 Sa K9 MOT?
Before your 2010 Suzuki Gsf 1250 Sa K9 MOT, check these commonly-failed items: brake control has insufficient reserve travel, the aim of a headlamp is not within limits laid down in the requirements, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Suzuki Gsf 1250 Sa K9 reliable for MOT?
With a 90.9% MOT pass rate, the 2010 Suzuki Gsf 1250 Sa K9 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.