DVSA Statistics
2012 Suzuki Gw 250 L3
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2012 Suzuki Gw 250 L3 (only 26 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 26 DVSA anonymised MOT tests · About this data
Pass Rate
84.6%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Indicator bulbs are quick and cheap to replace.
Based on DVSA statistics from 26 recorded tests.
Pre-MOT Checklist for 2012 Suzuki Gw 250 L3
Based on common failure points for this model, check these items before your MOT:
- 1
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Suzuki Gw 250 L3.
Frequently Asked Questions
Is a 2012 Suzuki Gw 250 L3 likely to fail its MOT?
Based on DVSA statistics, the 2012 Suzuki Gw 250 L3 has a 84.6% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2012 Suzuki Gw 250 L3?
The most common MOT failure reasons for a 2012 Suzuki Gw 250 L3 are: a transmission belt, chain, sprocket or pulley excessively loose or worn, a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, brake lining or pad worn below 1.0mm. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 Suzuki Gw 250 L3 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a transmission belt, chain, sprocket or pulley excessively loose or worn, a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, brake lining or pad worn below 1.0mm. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 Suzuki Gw 250 L3s fail their MOT?
Around 15% of 2012 Suzuki Gw 250 L3s fail their MOT test, meaning roughly 1 in 7 don't pass first time. The most common reasons are a transmission belt, chain, sprocket or pulley excessively loose or worn and a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 Suzuki Gw 250 L3 MOT?
Before your 2012 Suzuki Gw 250 L3 MOT, check these commonly-failed items: a transmission belt, chain, sprocket or pulley excessively loose or worn, a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, brake lining or pad worn below 1.0mm. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 Suzuki Gw 250 L3 reliable for MOT?
With a 84.6% MOT pass rate, the 2012 Suzuki Gw 250 L3 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.