DVSA Statistics
1996 Suzuki Sj413
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1996 Suzuki Sj413 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1996 Suzuki Sj413
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
- 3
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Suzuki Sj413.
Frequently Asked Questions
Is a 1996 Suzuki Sj413 likely to fail its MOT?
Based on DVSA statistics, the 1996 Suzuki Sj413 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1996 Suzuki Sj413?
The most common MOT failure reasons for a 1996 Suzuki Sj413 are: fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, brake pipe damaged or excessively corroded, indicator or hazard warning switch inoperative. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1996 Suzuki Sj413 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, brake pipe damaged or excessively corroded, indicator or hazard warning switch inoperative. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1996 Suzuki Sj413s fail their MOT?
Around 50% of 1996 Suzuki Sj413s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users and brake pipe damaged or excessively corroded. Pre-checking these items can significantly improve your chances.
What should I check before my 1996 Suzuki Sj413 MOT?
Before your 1996 Suzuki Sj413 MOT, check these commonly-failed items: fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, brake pipe damaged or excessively corroded, indicator or hazard warning switch inoperative. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1996 Suzuki Sj413 reliable for MOT?
With a 50% MOT pass rate, the 1996 Suzuki Sj413 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.