DVSA Statistics
2004 Sym Dd50
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2004 Sym Dd50 (only 12 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 12 DVSA anonymised MOT tests · About this data
Pass Rate
91.7%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 12 recorded tests.
Pre-MOT Checklist for 2004 Sym Dd50
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 3
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Sym Dd50.
Frequently Asked Questions
Is a 2004 Sym Dd50 likely to fail its MOT?
Based on DVSA statistics, the 2004 Sym Dd50 has a 91.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2004 Sym Dd50?
The most common MOT failure reasons for a 2004 Sym Dd50 are: brake control so positioned, bent or shortened that the brake cannot be readily applied., exhaust noise levels in excess of those permitted, a main load-bearing structural member corroded to the extent that the rigidity of the assembly is seriously reduced. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2004 Sym Dd50 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake control so positioned, bent or shortened that the brake cannot be readily applied., exhaust noise levels in excess of those permitted, a main load-bearing structural member corroded to the extent that the rigidity of the assembly is seriously reduced. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2004 Sym Dd50s fail their MOT?
Around 8% of 2004 Sym Dd50s fail their MOT test, meaning roughly 1 in 13 don't pass first time. The most common reasons are brake control so positioned, bent or shortened that the brake cannot be readily applied. and exhaust noise levels in excess of those permitted. Pre-checking these items can significantly improve your chances.
What should I check before my 2004 Sym Dd50 MOT?
Before your 2004 Sym Dd50 MOT, check these commonly-failed items: brake control so positioned, bent or shortened that the brake cannot be readily applied., exhaust noise levels in excess of those permitted, a main load-bearing structural member corroded to the extent that the rigidity of the assembly is seriously reduced. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2004 Sym Dd50 reliable for MOT?
With a 91.7% MOT pass rate, the 2004 Sym Dd50 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.