DVSA Statistics
2010 Sym Mio
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Sym Mio (only 21 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 21 DVSA anonymised MOT tests · About this data
Pass Rate
85.7%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 21 recorded tests.
Pre-MOT Checklist for 2010 Sym Mio
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Sym Mio.
Frequently Asked Questions
Is a 2010 Sym Mio likely to fail its MOT?
Based on DVSA statistics, the 2010 Sym Mio has a 85.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Sym Mio?
The most common MOT failure reasons for a 2010 Sym Mio are: a tyre with a cut in excess of the requirements deep enough to reach the ply or cords, a tyre valve seriously damaged or misaligned likely which could cause sudden deflation of the tyre, a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Sym Mio fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a tyre with a cut in excess of the requirements deep enough to reach the ply or cords, a tyre valve seriously damaged or misaligned likely which could cause sudden deflation of the tyre, a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Sym Mios fail their MOT?
Around 14% of 2010 Sym Mios fail their MOT test, meaning roughly 1 in 7 don't pass first time. The most common reasons are a tyre with a cut in excess of the requirements deep enough to reach the ply or cords and a tyre valve seriously damaged or misaligned likely which could cause sudden deflation of the tyre. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Sym Mio MOT?
Before your 2010 Sym Mio MOT, check these commonly-failed items: a tyre with a cut in excess of the requirements deep enough to reach the ply or cords, a tyre valve seriously damaged or misaligned likely which could cause sudden deflation of the tyre, a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Sym Mio reliable for MOT?
With a 85.7% MOT pass rate, the 2010 Sym Mio performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.