DVSA Statistics
2020 Taiwan Golden Bee Esa
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2020 Taiwan Golden Bee Esa (only 17 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 17 DVSA anonymised MOT tests · About this data
Pass Rate
82.4%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Number plate lights are a quick fix.
Based on DVSA statistics from 17 recorded tests.
Pre-MOT Checklist for 2020 Taiwan Golden Bee Esa
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure number plate lights work and plates are clean and legible
Lighting – Common fail on this model
- 3
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Taiwan Golden Bee Esa.
Frequently Asked Questions
Is a 2020 Taiwan Golden Bee Esa likely to fail its MOT?
Based on DVSA statistics, the 2020 Taiwan Golden Bee Esa has a 82.4% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2020 Taiwan Golden Bee Esa?
The most common MOT failure reasons for a 2020 Taiwan Golden Bee Esa are: a suspension pin, bush or joint excessively worn, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, number plate does not conform to the specified requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2020 Taiwan Golden Bee Esa fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, number plate does not conform to the specified requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2020 Taiwan Golden Bee Esas fail their MOT?
Around 18% of 2020 Taiwan Golden Bee Esas fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps. Pre-checking these items can significantly improve your chances.
What should I check before my 2020 Taiwan Golden Bee Esa MOT?
Before your 2020 Taiwan Golden Bee Esa MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, number plate does not conform to the specified requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2020 Taiwan Golden Bee Esa reliable for MOT?
With a 82.4% MOT pass rate, the 2020 Taiwan Golden Bee Esa performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.