Skip to content
MOTCHECK
Beta

DVSA Statistics

1993 Talbot Express 1300 D
MOT Pass Rate & Pre-MOT Checklist

Used 1993 Talbot Express 1300 Ds usually pass their MOT, but around 1 in 4 still fail, most often for brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and the aim of a headlamp is not within limits laid down in the requirements. Based on 177 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

74.6%

Pass Rate

Based on 177 DVSA anonymised MOT tests · About this data

Pass Rate

74.6%

About average

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Brake pipe damaged or excessively corroded
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    Brake pipe damaged or excessively corroded

    6.1%
  2. 2

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    5.3%
  3. 3

    The aim of a headlamp is not within limits laid down in the requirements

    4.8%
  4. 4

    A lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning

    4.2%
  5. 5

    Exhaust system leaking or insecure

    4.2%

Based on DVSA statistics from 177 recorded tests.

Pre-MOT Checklist for 1993 Talbot Express 1300 D

Based on common failure points for this model, check these items before your MOT:

  • 1

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

  • 2

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 3

    Test all headlights work and aim is correct - check for condensation inside

    Lighting – Common fail on this model

  • 4

    Check exhaust for leaks, holes, or excessive corrosion - listen for blowing

    Exhaust – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Talbot Express 1300 D.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1993 Talbot Express 1300 D likely to fail its MOT?

Based on DVSA statistics, the 1993 Talbot Express 1300 D has a 74.6% MOT pass rate. This is about average for vehicles of this age.

What are the most common MOT failures on a 1993 Talbot Express 1300 D?

The most common MOT failure reasons for a 1993 Talbot Express 1300 D are: brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1993 Talbot Express 1300 D fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1993 Talbot Express 1300 Ds fail their MOT?

Around 25% of 1993 Talbot Express 1300 Ds fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.

What should I check before my 1993 Talbot Express 1300 D MOT?

Before your 1993 Talbot Express 1300 D MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1993 Talbot Express 1300 D reliable for MOT?

With a 74.6% MOT pass rate, the 1993 Talbot Express 1300 D performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.