DVSA Statistics
1992 Talbot Kon Tiki
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1992 Talbot Kon Tiki (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1992 Talbot Kon Tiki
Based on common failure points for this model, check these items before your MOT:
- 1
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 2
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Talbot Kon Tiki.
Frequently Asked Questions
Is a 1992 Talbot Kon Tiki likely to fail its MOT?
Based on DVSA statistics, the 1992 Talbot Kon Tiki has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1992 Talbot Kon Tiki?
The most common MOT failure reasons for a 1992 Talbot Kon Tiki are: the aim of a headlamp is not within limits laid down in the requirements, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc, wiper blade missing or obviously not clearing the windscreen. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1992 Talbot Kon Tiki fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the aim of a headlamp is not within limits laid down in the requirements, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc, wiper blade missing or obviously not clearing the windscreen. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1992 Talbot Kon Tikis fail their MOT?
Around 50% of 1992 Talbot Kon Tikis fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are the aim of a headlamp is not within limits laid down in the requirements and a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc. Pre-checking these items can significantly improve your chances.
What should I check before my 1992 Talbot Kon Tiki MOT?
Before your 1992 Talbot Kon Tiki MOT, check these commonly-failed items: the aim of a headlamp is not within limits laid down in the requirements, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc, wiper blade missing or obviously not clearing the windscreen. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1992 Talbot Kon Tiki reliable for MOT?
With a 50% MOT pass rate, the 1992 Talbot Kon Tiki performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.