Skip to content
MOTCHECK
Beta

DVSA Statistics

2012 Tgb R50 X
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2012 Tgb R50 X (only 8 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

75%

Pass Rate

Based on 8 DVSA anonymised MOT tests · About this data

Pass Rate

75%

About average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:A brake lining or pad contaminated with oil, grease etc
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    A brake lining or pad contaminated with oil, grease etc

    22.2%
  2. 2

    A rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps

    11.1%
  3. 3

    Brake lining or pad worn below 1.0mm

    11.1%
  4. 4

    Brake disc or drum significantly and obviously worn

    11.1%
  5. 5

    Brake control so positioned, bent or shortened that the brake cannot be readily applied.

    11.1%

Based on DVSA statistics from 8 recorded tests.

Pre-MOT Checklist for 2012 Tgb R50 X

Based on common failure points for this model, check these items before your MOT:

  • 1

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Tgb R50 X.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2012 Tgb R50 X likely to fail its MOT?

Based on DVSA statistics, the 2012 Tgb R50 X has a 75% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2012 Tgb R50 X?

The most common MOT failure reasons for a 2012 Tgb R50 X are: a brake lining or pad contaminated with oil, grease etc, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, brake lining or pad worn below 1.0mm. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2012 Tgb R50 X fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a brake lining or pad contaminated with oil, grease etc, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, brake lining or pad worn below 1.0mm. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2012 Tgb R50 Xs fail their MOT?

Around 25% of 2012 Tgb R50 Xs fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are a brake lining or pad contaminated with oil, grease etc and a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps. Pre-checking these items can significantly improve your chances.

What should I check before my 2012 Tgb R50 X MOT?

Before your 2012 Tgb R50 X MOT, check these commonly-failed items: a brake lining or pad contaminated with oil, grease etc, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, brake lining or pad worn below 1.0mm. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2012 Tgb R50 X reliable for MOT?

With a 75% MOT pass rate, the 2012 Tgb R50 X performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.