DVSA Statistics
2010 Toyota Bb
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Toyota Bb (only 9 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 9 DVSA anonymised MOT tests · About this data
Pass Rate
88.9%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Wiper blades are a common fail on BBs. Quick 5-minute fix.
Based on DVSA statistics from 9 recorded tests.
Pre-MOT Checklist for 2010 Toyota Bb
Based on common failure points for this model, check these items before your MOT:
- 1
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Toyota Bb.
Frequently Asked Questions
Is a 2010 Toyota Bb likely to fail its MOT?
Based on DVSA statistics, the 2010 Toyota Bb has a 88.9% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Toyota Bb?
The most common MOT failure reasons for a 2010 Toyota Bb are: wiper blade missing or obviously not clearing the windscreen, a brake lining or pad worn below 1.5mm, child seat fitted not allowing full inspection of adult belt. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Toyota Bb fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: wiper blade missing or obviously not clearing the windscreen, a brake lining or pad worn below 1.5mm, child seat fitted not allowing full inspection of adult belt. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Toyota Bbs fail their MOT?
Around 11% of 2010 Toyota Bbs fail their MOT test, meaning roughly 1 in 9 don't pass first time. The most common reasons are wiper blade missing or obviously not clearing the windscreen and a brake lining or pad worn below 1.5mm. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Toyota Bb MOT?
Before your 2010 Toyota Bb MOT, check these commonly-failed items: wiper blade missing or obviously not clearing the windscreen, a brake lining or pad worn below 1.5mm, child seat fitted not allowing full inspection of adult belt. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Toyota Bb reliable for MOT?
With a 88.9% MOT pass rate, the 2010 Toyota Bb performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.