DVSA Statistics
2000 Toyota Emina
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2000 Toyota Emina (only 5 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 5 DVSA anonymised MOT tests · About this data
Pass Rate
80%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 5 recorded tests.
Pre-MOT Checklist for 2000 Toyota Emina
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Ensure all doors open and close properly and latches engage
Bodywork – Common fail on this model
- 3
Visually inspect coil springs for cracks or broken coils
Suspension – Common fail on this model
- 4
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Toyota Emina.
Frequently Asked Questions
Is a 2000 Toyota Emina likely to fail its MOT?
Based on DVSA statistics, the 2000 Toyota Emina has a 80% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2000 Toyota Emina?
The most common MOT failure reasons for a 2000 Toyota Emina are: brake pipe damaged or excessively corroded, a door will not open using the relevant control or close properly, a spring or spring component fractured or seriously weakened. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2000 Toyota Emina fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, a door will not open using the relevant control or close properly, a spring or spring component fractured or seriously weakened. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2000 Toyota Eminas fail their MOT?
Around 20% of 2000 Toyota Eminas fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and a door will not open using the relevant control or close properly. Pre-checking these items can significantly improve your chances.
What should I check before my 2000 Toyota Emina MOT?
Before your 2000 Toyota Emina MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, a door will not open using the relevant control or close properly, a spring or spring component fractured or seriously weakened. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2000 Toyota Emina reliable for MOT?
With a 80% MOT pass rate, the 2000 Toyota Emina performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.