DVSA Statistics
1992 Toyota Hiace
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1992 Toyota Hiace (only 26 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 26 DVSA anonymised MOT tests · About this data
Pass Rate
69.2%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Wiper blades are a common fail on HIACEs. Quick 5-minute fix.
Based on DVSA statistics from 26 recorded tests.
Pre-MOT Checklist for 1992 Toyota Hiace
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Toyota Hiace.
Frequently Asked Questions
Is a 1992 Toyota Hiace likely to fail its MOT?
Based on DVSA statistics, the 1992 Toyota Hiace has a 69.2% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 1992 Toyota Hiace?
The most common MOT failure reasons for a 1992 Toyota Hiace are: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1992 Toyota Hiace fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1992 Toyota Hiaces fail their MOT?
Around 31% of 1992 Toyota Hiaces fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1992 Toyota Hiace MOT?
Before your 1992 Toyota Hiace MOT, check these commonly-failed items: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1992 Toyota Hiace reliable for MOT?
With a 69.2% MOT pass rate, the 1992 Toyota Hiace performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.