DVSA Statistics
2016 Toyota Ipsum
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2016 Toyota Ipsum (only 15 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 15 DVSA anonymised MOT tests · About this data
Pass Rate
80%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 15 recorded tests.
Pre-MOT Checklist for 2016 Toyota Ipsum
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
How Does This Compare to Other Years?
Previous Year
2015 Toyota Ipsum
Based on 7 UK MOT tests
Next Year
2017 Toyota Ipsum
Based on 17 UK MOT tests
The 2016 model shows improvement over 2015 but the 2017 model has an even better pass rate.
Why Trust This Data?
Official UK Government Source
This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.
Understanding the Statistics
This page is based on 15 MOT tests from the 2023 DVSA dataset. Your 2016 Toyota Ipsum was 7 years old when this data was collected and is now 10 years old.
Sample Size
Limited data - 15 tests (use as rough guide only)
Limitations
Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Toyota Ipsum.
Frequently Asked Questions
Is a 2016 Toyota Ipsum likely to fail its MOT?
Based on DVSA statistics, the 2016 Toyota Ipsum has a 80% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2016 Toyota Ipsum?
The most common MOT failure reasons for a 2016 Toyota Ipsum are: a brake lining or pad worn below 1.5mm, a suspension pin, bush or joint excessively worn, a wheel bearing with excessive play. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2016 Toyota Ipsum fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a brake lining or pad worn below 1.5mm, a suspension pin, bush or joint excessively worn, a wheel bearing with excessive play. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2016 Toyota Ipsums fail their MOT?
Around 20% of 2016 Toyota Ipsums fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are a brake lining or pad worn below 1.5mm and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2016 Toyota Ipsum MOT?
Before your 2016 Toyota Ipsum MOT, check these commonly-failed items: a brake lining or pad worn below 1.5mm, a suspension pin, bush or joint excessively worn, a wheel bearing with excessive play. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2016 Toyota Ipsum reliable for MOT?
With a 80% MOT pass rate, the 2016 Toyota Ipsum performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.