DVSA Statistics
2012 Toyota Land Cruiser
MOT Pass Rate & Pre-MOT Checklist
Used 2012 Toyota Land Cruisers usually pass their MOT, but around 1 in 8 still fail, most often for a brake lining or pad worn below 1.5mm, a suspension pin, bush or joint excessively worn and exhaust system leaking or insecure. Based on 348 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 348 DVSA anonymised MOT tests · About this data
Pass Rate
87.9%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 348 recorded tests.
Pre-MOT Checklist for 2012 Toyota Land Cruiser
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 4
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Toyota Land Cruiser.
Frequently Asked Questions
Is a 2012 Toyota Land Cruiser likely to fail its MOT?
Based on DVSA statistics, the 2012 Toyota Land Cruiser has a 87.9% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2012 Toyota Land Cruiser?
The most common MOT failure reasons for a 2012 Toyota Land Cruiser are: a brake lining or pad worn below 1.5mm, a suspension pin, bush or joint excessively worn, exhaust system leaking or insecure. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 Toyota Land Cruiser fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a brake lining or pad worn below 1.5mm, a suspension pin, bush or joint excessively worn, exhaust system leaking or insecure. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 Toyota Land Cruisers fail their MOT?
Around 12% of 2012 Toyota Land Cruisers fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are a brake lining or pad worn below 1.5mm and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 Toyota Land Cruiser MOT?
Before your 2012 Toyota Land Cruiser MOT, check these commonly-failed items: a brake lining or pad worn below 1.5mm, a suspension pin, bush or joint excessively worn, exhaust system leaking or insecure. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 Toyota Land Cruiser reliable for MOT?
With a 87.9% MOT pass rate, the 2012 Toyota Land Cruiser performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.