DVSA Statistics
1987 Toyota Mr2
MOT Pass Rate & Pre-MOT Checklist
Used 1987 Toyota Mr2s usually pass their MOT, but around 1 in 5 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn and vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Based on 188 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 188 DVSA anonymised MOT tests · About this data
Pass Rate
80.9%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 188 recorded tests.
Pre-MOT Checklist for 1987 Toyota Mr2
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Toyota Mr2.
Frequently Asked Questions
Is a 1987 Toyota Mr2 likely to fail its MOT?
Based on DVSA statistics, the 1987 Toyota Mr2 has a 80.9% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1987 Toyota Mr2?
The most common MOT failure reasons for a 1987 Toyota Mr2 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1987 Toyota Mr2 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1987 Toyota Mr2s fail their MOT?
Around 19% of 1987 Toyota Mr2s fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1987 Toyota Mr2 MOT?
Before your 1987 Toyota Mr2 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1987 Toyota Mr2 reliable for MOT?
With a 80.9% MOT pass rate, the 1987 Toyota Mr2 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.