Skip to content
MOTCHECK
Beta

DVSA Statistics

1992 Toyota Mr2
MOT Pass Rate & Pre-MOT Checklist

Used 1992 Toyota Mr2s usually pass their MOT, but around 1 in 3 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users and emissions levels exceed default limits. Based on 359 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

69.6%

Pass Rate

Based on 359 DVSA anonymised MOT tests · About this data

Pass Rate

69.6%

About average

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Worn tyres are a safety issue and common MOT fail.

Fixes:Tyre tread depth not in accordance with the requirements
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    6.2%
  2. 2

    Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users

    5.4%
  3. 3

    Emissions levels exceed default limits

    5.4%
  4. 4

    A suspension pin, bush or joint excessively worn

    4.8%
  5. 5

    Tyre tread depth not in accordance with the requirements

    4.6%

Based on DVSA statistics from 359 recorded tests.

Pre-MOT Checklist for 1992 Toyota Mr2

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Ensure engine is at operating temperature before test - take a good run beforehand

    Emissions – Common fail on this model

  • 3

    Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre

    Tyres – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Toyota Mr2.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1992 Toyota Mr2 likely to fail its MOT?

Based on DVSA statistics, the 1992 Toyota Mr2 has a 69.6% MOT pass rate. This is about average for vehicles of this age.

What are the most common MOT failures on a 1992 Toyota Mr2?

The most common MOT failure reasons for a 1992 Toyota Mr2 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, emissions levels exceed default limits. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1992 Toyota Mr2 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, emissions levels exceed default limits. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1992 Toyota Mr2s fail their MOT?

Around 30% of 1992 Toyota Mr2s fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Pre-checking these items can significantly improve your chances.

What should I check before my 1992 Toyota Mr2 MOT?

Before your 1992 Toyota Mr2 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, emissions levels exceed default limits. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1992 Toyota Mr2 reliable for MOT?

With a 69.6% MOT pass rate, the 1992 Toyota Mr2 performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.