DVSA Statistics
2003 Toyota Noah
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2003 Toyota Noah (only 11 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 11 DVSA anonymised MOT tests · About this data
Pass Rate
63.6%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 11 recorded tests.
Pre-MOT Checklist for 2003 Toyota Noah
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 4
Test front and rear fog lights work - check warning light on dashboard
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Toyota Noah.
Frequently Asked Questions
Is a 2003 Toyota Noah likely to fail its MOT?
Based on DVSA statistics, the 2003 Toyota Noah has a 63.6% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2003 Toyota Noah?
The most common MOT failure reasons for a 2003 Toyota Noah are: tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn, a brake lining or pad worn below 1.5mm. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2003 Toyota Noah fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn, a brake lining or pad worn below 1.5mm. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2003 Toyota Noahs fail their MOT?
Around 36% of 2003 Toyota Noahs fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are tyre tread depth not in accordance with the requirements and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2003 Toyota Noah MOT?
Before your 2003 Toyota Noah MOT, check these commonly-failed items: tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn, a brake lining or pad worn below 1.5mm. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2003 Toyota Noah reliable for MOT?
With a 63.6% MOT pass rate, the 2003 Toyota Noah performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.