DVSA Statistics
2003 Toyota Sera
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2003 Toyota Sera (only 11 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 11 DVSA anonymised MOT tests · About this data
Pass Rate
63.6%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 11 recorded tests.
Pre-MOT Checklist for 2003 Toyota Sera
Based on common failure points for this model, check these items before your MOT:
- 1
Visually inspect coil springs for cracks or broken coils
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Test front and rear fog lights work - check warning light on dashboard
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Toyota Sera.
Frequently Asked Questions
Is a 2003 Toyota Sera likely to fail its MOT?
Based on DVSA statistics, the 2003 Toyota Sera has a 63.6% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2003 Toyota Sera?
The most common MOT failure reasons for a 2003 Toyota Sera are: a spring or spring component fractured or seriously weakened, brake pipe damaged or excessively corroded, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2003 Toyota Sera fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a spring or spring component fractured or seriously weakened, brake pipe damaged or excessively corroded, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2003 Toyota Seras fail their MOT?
Around 36% of 2003 Toyota Seras fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are a spring or spring component fractured or seriously weakened and brake pipe damaged or excessively corroded. Pre-checking these items can significantly improve your chances.
What should I check before my 2003 Toyota Sera MOT?
Before your 2003 Toyota Sera MOT, check these commonly-failed items: a spring or spring component fractured or seriously weakened, brake pipe damaged or excessively corroded, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2003 Toyota Sera reliable for MOT?
With a 63.6% MOT pass rate, the 2003 Toyota Sera performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.