DVSA Statistics
2010 Toyota Vitz
MOT Pass Rate & Pre-MOT Checklist
Used 2010 Toyota Vitzs usually pass their MOT, but around 1 in 6 still fail, most often for a brake lining or pad worn below 1.5mm, product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow and a suspension joint dust cover missing or no longer prevents the ingress of dirt etc. Based on 69 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 69 DVSA anonymised MOT tests · About this data
Pass Rate
82.6%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 69 recorded tests.
Pre-MOT Checklist for 2010 Toyota Vitz
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test front and rear fog lights work - check warning light on dashboard
Lighting – Common fail on this model
- 4
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Toyota Vitz.
Frequently Asked Questions
Is a 2010 Toyota Vitz likely to fail its MOT?
Based on DVSA statistics, the 2010 Toyota Vitz has a 82.6% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Toyota Vitz?
The most common MOT failure reasons for a 2010 Toyota Vitz are: a brake lining or pad worn below 1.5mm, product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow, a suspension joint dust cover missing or no longer prevents the ingress of dirt etc. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Toyota Vitz fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a brake lining or pad worn below 1.5mm, product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow, a suspension joint dust cover missing or no longer prevents the ingress of dirt etc. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Toyota Vitzs fail their MOT?
Around 17% of 2010 Toyota Vitzs fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are a brake lining or pad worn below 1.5mm and product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Toyota Vitz MOT?
Before your 2010 Toyota Vitz MOT, check these commonly-failed items: a brake lining or pad worn below 1.5mm, product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow, a suspension joint dust cover missing or no longer prevents the ingress of dirt etc. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Toyota Vitz reliable for MOT?
With a 82.6% MOT pass rate, the 2010 Toyota Vitz performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.