DVSA Statistics
2010 Toyota Xt
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Toyota Xt (only 3 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 3 DVSA anonymised MOT tests · About this data
Pass Rate
33.3%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 3 recorded tests.
Pre-MOT Checklist for 2010 Toyota Xt
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure all doors open and close properly and latches engage
Bodywork – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Toyota Xt.
Frequently Asked Questions
Is a 2010 Toyota Xt likely to fail its MOT?
Based on DVSA statistics, the 2010 Toyota Xt has a 33.3% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2010 Toyota Xt?
The most common MOT failure reasons for a 2010 Toyota Xt are: a door will not open using the relevant control or close properly, tyre tread depth not in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Toyota Xt fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a door will not open using the relevant control or close properly, tyre tread depth not in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Toyota Xts fail their MOT?
Around 67% of 2010 Toyota Xts fail their MOT test, meaning roughly 1 in 1 don't pass first time. The most common reasons are a door will not open using the relevant control or close properly and tyre tread depth not in accordance with the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Toyota Xt MOT?
Before your 2010 Toyota Xt MOT, check these commonly-failed items: a door will not open using the relevant control or close properly, tyre tread depth not in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Toyota Xt reliable for MOT?
With a 33.3% MOT pass rate, the 2010 Toyota Xt performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.