DVSA Statistics
2006 Triumph Speed Triple 1050
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2006 Triumph Speed Triple 1050 (only 20 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 20 DVSA anonymised MOT tests · About this data
Pass Rate
95%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Indicator bulbs are quick and cheap to replace.
Based on DVSA statistics from 20 recorded tests.
Pre-MOT Checklist for 2006 Triumph Speed Triple 1050
Based on common failure points for this model, check these items before your MOT:
- 1
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 2
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
- 3
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Triumph Speed Triple 1050.
Frequently Asked Questions
Is a 2006 Triumph Speed Triple 1050 likely to fail its MOT?
Based on DVSA statistics, the 2006 Triumph Speed Triple 1050 has a 95% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2006 Triumph Speed Triple 1050?
The most common MOT failure reasons for a 2006 Triumph Speed Triple 1050 are: exhaust noise levels in excess of those permitted, steering head bearings have excessive wear or play, a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2006 Triumph Speed Triple 1050 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: exhaust noise levels in excess of those permitted, steering head bearings have excessive wear or play, a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2006 Triumph Speed Triple 1050s fail their MOT?
Around 5% of 2006 Triumph Speed Triple 1050s fail their MOT test, meaning roughly 1 in 20 don't pass first time. The most common reasons are exhaust noise levels in excess of those permitted and steering head bearings have excessive wear or play. Pre-checking these items can significantly improve your chances.
What should I check before my 2006 Triumph Speed Triple 1050 MOT?
Before your 2006 Triumph Speed Triple 1050 MOT, check these commonly-failed items: exhaust noise levels in excess of those permitted, steering head bearings have excessive wear or play, a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2006 Triumph Speed Triple 1050 reliable for MOT?
With a 95% MOT pass rate, the 2006 Triumph Speed Triple 1050 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.