Skip to content
MOTCHECK
Beta

DVSA Statistics

1982 Triumph Tr 7
MOT Pass Rate & Pre-MOT Checklist

Used 1982 Triumph Tr 7s usually pass their MOT, but around 1 in 7 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle. and emissions levels exceed default limits. Based on 80 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

85%

Pass Rate

Based on 80 DVSA anonymised MOT tests · About this data

Pass Rate

85%

Higher than average

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    11.4%
  2. 2

    Brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.

    9.1%
  3. 3

    Emissions levels exceed default limits

    6.8%
  4. 4

    A suspension pin, bush or joint excessively worn

    4.5%
  5. 5

    A shock absorber which has negligible damping effect

    4.5%

Based on DVSA statistics from 80 recorded tests.

Pre-MOT Checklist for 1982 Triumph Tr 7

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

  • 3

    Ensure engine is at operating temperature before test - take a good run beforehand

    Emissions – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Triumph Tr 7.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1982 Triumph Tr 7 likely to fail its MOT?

Based on DVSA statistics, the 1982 Triumph Tr 7 has a 85% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1982 Triumph Tr 7?

The most common MOT failure reasons for a 1982 Triumph Tr 7 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle., emissions levels exceed default limits. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1982 Triumph Tr 7 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle., emissions levels exceed default limits. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1982 Triumph Tr 7s fail their MOT?

Around 15% of 1982 Triumph Tr 7s fail their MOT test, meaning roughly 1 in 7 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.. Pre-checking these items can significantly improve your chances.

What should I check before my 1982 Triumph Tr 7 MOT?

Before your 1982 Triumph Tr 7 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle., emissions levels exceed default limits. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1982 Triumph Tr 7 reliable for MOT?

With a 85% MOT pass rate, the 1982 Triumph Tr 7 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.