DVSA Statistics
1972 Volkswagen T2 Bay
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1972 Volkswagen T2 Bay (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1972 Volkswagen T2 Bay
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Volkswagen T2 Bay.
Frequently Asked Questions
Is a 1972 Volkswagen T2 Bay likely to fail its MOT?
Based on DVSA statistics, the 1972 Volkswagen T2 Bay has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1972 Volkswagen T2 Bay?
The most common MOT failure reasons for a 1972 Volkswagen T2 Bay are: a suspension pin, bush or joint excessively worn, parking brake efficiency below minimum requirement, the strength or continuity of the load bearing structure within 30cm of any steering component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1972 Volkswagen T2 Bay fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, parking brake efficiency below minimum requirement, the strength or continuity of the load bearing structure within 30cm of any steering component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1972 Volkswagen T2 Bays fail their MOT?
Around 50% of 1972 Volkswagen T2 Bays fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and parking brake efficiency below minimum requirement. Pre-checking these items can significantly improve your chances.
What should I check before my 1972 Volkswagen T2 Bay MOT?
Before your 1972 Volkswagen T2 Bay MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, parking brake efficiency below minimum requirement, the strength or continuity of the load bearing structure within 30cm of any steering component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1972 Volkswagen T2 Bay reliable for MOT?
With a 50% MOT pass rate, the 1972 Volkswagen T2 Bay performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.