DVSA Statistics
1990 Volkswagen T3
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1990 Volkswagen T3 (only 6 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 6 DVSA anonymised MOT tests · About this data
Pass Rate
66.7%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 6 recorded tests.
Pre-MOT Checklist for 1990 Volkswagen T3
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Visually check brake discs for scoring, cracks, or excessive lip
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Volkswagen T3.
Frequently Asked Questions
Is a 1990 Volkswagen T3 likely to fail its MOT?
Based on DVSA statistics, the 1990 Volkswagen T3 has a 66.7% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 1990 Volkswagen T3?
The most common MOT failure reasons for a 1990 Volkswagen T3 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed default limits, lambda coefficient outside the default limits or the range specified by the manufacturer. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1990 Volkswagen T3 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed default limits, lambda coefficient outside the default limits or the range specified by the manufacturer. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1990 Volkswagen T3s fail their MOT?
Around 33% of 1990 Volkswagen T3s fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and emissions levels exceed default limits. Pre-checking these items can significantly improve your chances.
What should I check before my 1990 Volkswagen T3 MOT?
Before your 1990 Volkswagen T3 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed default limits, lambda coefficient outside the default limits or the range specified by the manufacturer. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1990 Volkswagen T3 reliable for MOT?
With a 66.7% MOT pass rate, the 1990 Volkswagen T3 performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.