DVSA Statistics
1992 Volkswagen T3
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1992 Volkswagen T3 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1992 Volkswagen T3
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
- 3
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 4
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Volkswagen T3.
Frequently Asked Questions
Is a 1992 Volkswagen T3 likely to fail its MOT?
Based on DVSA statistics, the 1992 Volkswagen T3 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1992 Volkswagen T3?
The most common MOT failure reasons for a 1992 Volkswagen T3 are: significant brake effort recorded with no brake applied indicating a binding brake, indicator or hazard warning switch does not operate in accordance with the requirements, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1992 Volkswagen T3 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: significant brake effort recorded with no brake applied indicating a binding brake, indicator or hazard warning switch does not operate in accordance with the requirements, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1992 Volkswagen T3s fail their MOT?
Around 50% of 1992 Volkswagen T3s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are significant brake effort recorded with no brake applied indicating a binding brake and indicator or hazard warning switch does not operate in accordance with the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 1992 Volkswagen T3 MOT?
Before your 1992 Volkswagen T3 MOT, check these commonly-failed items: significant brake effort recorded with no brake applied indicating a binding brake, indicator or hazard warning switch does not operate in accordance with the requirements, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1992 Volkswagen T3 reliable for MOT?
With a 50% MOT pass rate, the 1992 Volkswagen T3 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.