DVSA Statistics
1992 Volvo 240
MOT Pass Rate & Pre-MOT Checklist
Used 1992 Volvo 240s usually pass their MOT, but around 1 in 4 still fail, most often for a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and exhaust system leaking or insecure. Based on 250 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 250 DVSA anonymised MOT tests · About this data
Pass Rate
75.2%
About average
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 250 recorded tests.
Pre-MOT Checklist for 1992 Volvo 240
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Volvo 240.
Frequently Asked Questions
Is a 1992 Volvo 240 likely to fail its MOT?
Based on DVSA statistics, the 1992 Volvo 240 has a 75.2% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1992 Volvo 240?
The most common MOT failure reasons for a 1992 Volvo 240 are: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, exhaust system leaking or insecure. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1992 Volvo 240 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, exhaust system leaking or insecure. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1992 Volvo 240s fail their MOT?
Around 25% of 1992 Volvo 240s fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 1992 Volvo 240 MOT?
Before your 1992 Volvo 240 MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, exhaust system leaking or insecure. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1992 Volvo 240 reliable for MOT?
With a 75.2% MOT pass rate, the 1992 Volvo 240 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.