DVSA Statistics
1991 Volvo 300 Series
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1991 Volvo 300 Series (only 16 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 16 DVSA anonymised MOT tests · About this data
Pass Rate
75%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 16 recorded tests.
Pre-MOT Checklist for 1991 Volvo 300 Series
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Volvo 300 Series.
Frequently Asked Questions
Is a 1991 Volvo 300 Series likely to fail its MOT?
Based on DVSA statistics, the 1991 Volvo 300 Series has a 75% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1991 Volvo 300 Series?
The most common MOT failure reasons for a 1991 Volvo 300 Series are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, significant brake effort recorded with no brake applied indicating a binding brake. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1991 Volvo 300 Series fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, significant brake effort recorded with no brake applied indicating a binding brake. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1991 Volvo 300 Seriess fail their MOT?
Around 25% of 1991 Volvo 300 Seriess fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Pre-checking these items can significantly improve your chances.
What should I check before my 1991 Volvo 300 Series MOT?
Before your 1991 Volvo 300 Series MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, significant brake effort recorded with no brake applied indicating a binding brake. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1991 Volvo 300 Series reliable for MOT?
With a 75% MOT pass rate, the 1991 Volvo 300 Series performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.